Comments - _cOdy_

Something is not right with the JKDF2 Remastered 3.3!
It DOES NOT use the Upscale Texture Pack at all.
The setup is set as the pdf shows.
Mega.nz

Something is not right with JKDF2 Remastered 3.3! It DOES NOT use the Upscale Texture Pack at all.
The setup is set as the pdf shows.
Mega.nz

I solved the problem; I copied the jkgm folder from the JK2 main folder to the
C:\username\AppData\Roaming\OpenJKDF2\openjkdf2\jkgm

Something is not right! It DOES NOT use the Upscale Texture Pack at all.
The setup is set as the pdf shows.
Mega.nz

I solved the problem; I copied the jkgm folder from the JK2 main folder to the
C:\username\AppData\Roaming\OpenJKDF2\openjkdf2\jkgm

I installed without any error on Win10. I setup the config.
The game starts but does not bring up any window. Does not matter the resolution nor the fullscreen true or false.
I can see the program Jedi Knight Main Executable (32 bit) - what uses 25% CPU - in the 'Task Manager' and I can close it down there, only.
It works on my Win7 system but not on my Win10.
I set the compatibility to Win7 in Win10 but there is no success.
What is wrong?

n orange? :'(

It is really cool! What about the physical damage of the crafts?

SerenityJediEngine2019.70
The snowing disappeared inside of the Hoth base; and I didn't notice the hovering AIs after the dead/load process BUT EVERYTHING ELSE REMAINED.

PROBLEMS with SerenityJediEngine2019.64

after a level reload the ai characters float above the ground (ALL LEVELS).

the invisible stormtroopers have not got skin on t1 yavin1b and t2 vjun1 levels.

luke ai jumps out the window on academy3 level and doesn't come back. i had to jump out and beat him out there.

the brightness/whiteness is blinding bright on hoth.
red smoke still exists.

the laserblasts and explosions are missing on some levels (t1 fatal, t2 vjun1).

ai kyle behaves the same disturbing way on t2 vjun1-2 after the player dies and reload the save game.
the playable character screams in the acid rain again while the force protection is turned on on vjun1.

SerenityJediEngine2019.62
the brightness/whiteness is blinding bright on hoth.
red smoke still exists.

the blaster fires and explosions are missing on some levels (t1 fatal, t2 vjun1).

ai kyle behaves the same disturbing way on t2 vjun1-2.
the playable character screams in the acid rain again while the force protection is turned on on vjun1.

SerenityJediEngine2019.58
red smoke still exists.
the blaster fires and explosions are missing on some levels.
ai kyle behaves the same disturbing way on vjun1-2.
the whiteness is blinding bright on hoth.

SerenityJediEngine2019.52
red smoke still exists.
the blaster fires and explosions are missing on some levels.
ai kyle behaves the same disturbing way!

SerenityJediEngine2019.43

Too much dust on the Mercenary Activity - Tatooine (t1_sour) map.

Snowing inside the base on Hoth [hoth2].

Some gases or smokes are red colored; first I noticed this on Hoth.

Sometimes there are not any blaster fire... I mean I do not see the shots!

The gases or smokes are red colored; first I noticed this on Hoth.

On Cult Investigation - Dosuun (T2_DPRED) you put guys with lightsaber but the player can not pick the sabers up when killed them.

On Vjun (vjun1) Kyle behaves the same bad way and

the player's character screams from the pain when it stands in the acid rain and does not matter if the Force Protect is turned on or not!

SerenityJediEngine2019.40
On the level Vjun (vjun1) Kyle turns off his saber at the beginning but later he does not turns off.
All other errors still exist except the
„I shoot through (or something) the enemy (it does not give any reaction for the shooting and later it dies) a lot of times”!

On vjun1 map the acid rain does not damage the player some part of the map.
Kyle always sucks away my shield with his saber!

SerenityJediEngine2019.38
On the level Vjun (vjun1) Kyle turns off his saber at the beginning but later he does not turns off.
All other errors still exist!
+ I shoot through (or something) the enemy (it does not give any reaction for the shooting and later it dies) a lot of times.

SerenityJediEngine2019.37
same mentioned errors are exist... still.
Mega.nz
the mindtrick level 3 = setMindTrick 4
and the jump to exit does not work!

One question, why does not the saber come back with saber throw level 3?

Almost all of the mentioned problems exist in the SerenityJediEngine2019.35 version too!
Except the game does not freeze when the AI and I throw the saber at the same time.
+ the floating enemies came back. This happens when I die and reload the save game.
A lot of textures (mostly floor) become blurry.
The prequelSaber and the RebelsSaber is the same now.

SerenityJediEngine2019.32

The red smoke is still exists.
Too much dust on the Mercenary Activity - Tatooine (t1_sour) map.
Snowing inside the base on Hoth [hoth2].
If I throw a grenade into the face of the enemy npc there aren't any explosions, only the npc flies away for expamle on Cult Investigation - Corellia (t1_rail) and Emergency Assistance - Bakura (t1_fatal) levels.

On the level [Emergency Assistance - Bakura (t1_fatal) the player character stands strange way at the beginning of the level.

On the level Vjun (vjun1) Kyle kills my character with his saber. Kyle does not turns off his saber and comes too close and takes off my shield my character ALL THE TIME. Does not kill me but this npc is bugging me all along the level.

A lot of times does not load the map after I selected the next level and upgrade the players character and give weapons.

The game freezes when the player and the npc throws the lightsabers at the same time.

JaceSolaris
Thanks the infos and your great job!!!

I tried your newer version (SerenityJediEngine2019.30) and in this I can choose other characters at the beginning of the game but there isn't custom character choose-able.

My setting is (a part of it):
seta r_mode "-1"
seta r_customwidth "2560"
seta r_customheight "1440"
seta cg_fov "105"

I would like to report some strange things!
Sometimes the characters do not run but they are float on the floor!
Sometimes there are not any blaster fire... I mean I do not see the shots!
The gases or smokes are red colored; first I noticed this on Hoth.

On the level [Emergency Assistance - Bakura (t1_fatal) the player character stands strange way at the beginning of the level. It doesn't lean to the spacecraft... and on this level there are any grenades explosions!

On the level Vjun (vjun1) Kyle kills my character with his saber. Kyle does not turns off his saber and comes too close and kills my character ALL THE TIME. I always have to run away from him but he comes after me, because we should fight together...

5) How can change the rotation of the lightsaber. It was horizontal spin in the origianl. In this it become vertical spin.

4) why does not shows any data the console after what I typed in?
For example I type in to know what is the setting g_dismemberment the console does not give and information back.

I would like to report some strange things. I used in single player only.

1) If I set the resolution to 4K there is an error. The view point zooms to the middle low center of the screen and I wasn't able to do anything. I had to rewrite the setting in the SerenityJediEngine2019-SP.cfg to get rid of this error. So, the 4K choosable but can not usable. (It also happens in the original version, too when I write this resolution in the cfg)
2) I can select Kyle Katarn skins only at the character creation at the beginning of the game.
3) The lightsaber does not come back when I throw it away. I have to "fire" again. (Is this normal?)

And a question, how can I lower the lightsaber blade? In the original i had to press the '1' button for this.

I'd like to know when the STEAM version will be the release?

I used this and works fine BUT some objects are invisible like the 'Lab flask'! Why? (Win7 x64, GTX1070)