6 levels. The default directory Quest For Hussein is installed to is C:\qfh\
After the files are extracted,
Run Setup.exe in your Quest For Hussein directory (C:\qfh\) first.
You can do this by going to the start menu and selcting RUN and typing in the following: C:\qfh\setup.exe
Setup your graphics and sounds.
Be sure to select the highest graphics mode your computer will allow. Usually 'Vesa 800 X 600'.
After you have setup everything, select Save and launch Q 4 Hussein.
Whenever you wish to play Quest For Hussein again, go to the start menu and go to RUN and type the following 'C:\qfh\quest2.exe'
.............................
©2002 Jesse Petrilla
QuestForHussein.com
.............................
The default directory Quest For Hussein is installed to is C:\qfh\
After the files are extracted,
Run Setup.exe in your Quest For Hussein directory (C:\qfh\) first.
You can do this by going to the start menu and selcting RUN and typing in the following: C:\qfh\setup.exe
Setup your graphics and sounds.
Be sure to select the highest graphics mode your computer will allow. Usually 'Vesa 800 X 600'.
After you have setup everything, select Save and launch Q 4 Hussein.
Whenever you wish to play Quest For Hussein again, go to the start menu and go to RUN and type the following 'C:\qfh\quest2.exe'
---------------
SOUND PROBLEMS
if you're not sure what your card's settings are, open a DOS prompt
(Start Menu - Programs - Accessories - MS DOS) then at the prompt
type the word: SET
Look for a line that starts with the word BLASTER.
BLASTER=A is the address, I is the IRQ, and D is the DMA.
Therefore, if the line reads: BLASTER=A220 I5 D1 T4,
your card uses addres 0x220, IRQ 5, and DMA 1.
When selecting your soundcard you will most likely want to use
Sound Blaster. Try different Sound Blaster types by
selecting Change Sound Card Type.
-------------------
PROBLEMS IN WINDOWS XP
For users running Windows XP:
You MUST right click on the main exe in your Quest For Hussein directory, quest2.exe and select Properties and then under
Compatibility, run in compatibility mode for windows 95 or windows 98.
You must do this in order for Quest For Hussein to work under Windows XP
-------------------
Usermaps:
To play a usermap for Quest For Hussein,
make sure the usermap is in the Quest For Hussein directory.
Run the program Setup.exe in the Quest For Hussein directory.
In Setup, scroll down to 'Select User Level' and select the usermap
that you wish to play. After making your selection, scroll down to
'Save and launch Q 4 Hussein'
-------------------
CONTROLS - Can be configured in the Setup.exe
Default Controls:
Move Forward = "Up Arrow" "Kpad8"
Move Backward = "Down Arrow" "Kpad2"
Turn Left = "Left Arrow" "Kpad4"
Turn Right = "Right Arrow" "KPad6"
Strafe = "LAlt" "RAlt"
Fire = "LCtrl" "RCtrl"
Open = "Space"
Run = "LShift" "RShift"
AutoRun = "CapLck"
Jump = "A" "/"
Crouch = "Z"
Look Up = "PgUp" "Kpad9"
Look Down = "PgDn" "Kpad3"
Look Left = "Insert" "Kpad0"
Look Right = "Delete" "Kpad."
Strafe Left = ","
Strafe Right = "."
Aim Up = "Home" "KPad7"
Aim Down = "End" "Kpad1"
Change Weapon = "1" "2" "3" etc. after you find them
Inventory = "Enter" "KpdEnt"
Inventory Left = "["
Inventory Right = "]"
MedKit = "M"
TurnAround = "BakSpc"
SendMessage = "T"
Map = "Tab"
Shrink Screen = "-" "Kpad-"
Enlarge Screen = "=" "Kpad+"
Center View = "KPad5"
Holster Weapon = "ScrLck"
Show Opponents Weapon = "W"
Map Follow Mode = "F"
See Coop View = "K"
Mouse Aiming = "U"
Toggle Crosshair = "I"
Quick Slice = "`"
Next Weapon = "'"
Previous Weapon = ";"
---------------------------
