Comments - Skullman8942

Hello again everyone!
I'm back with an improved configuration for the PS4 controller with D-Pad and Right Analogue support although 2 analogues CANNOT be set at the same time (You can only have one at any given time as the controller will not work as intended.

[6 axis 14 button device with hat switch]
Key1=32,0,32,4500,32,31500,4,-500
Key2=32,22500,32,18000,32,13500,4,500
Key3=32,27000,32,31500,32,22500,0,-500
Key4=32,4500,32,9000,32,13500,0,500
Key5=
Key6=50,0,51,0 (Circle) (Triangle)
Key7=54,0,57,0 (L2) (Start)
Key8=52,0 (L1)
Key9=53,0 (R1)
KeyA=55,0 (R2)
KeyB=
KeyC=51,0 (Triangle)
KeyD=48,0,49,0 (Square) (X)
[Wireless Controller]
Key1=32,0,32,4500,32,31500,4,-500
Key2=32,22500,32,18000,32,13500,4,500
Key3=32,27000,32,31500,32,22500,0,-500
Key4=32,4500,32,9000,32,13500,0,500
Key5=
Key6=50,0,51,0 (Circle) (Triangle)
Key7=54,0,57,0 (L2) (Start)
Key8=52,0 (L1)
Key9=53,0 (R1)
KeyA=55,0 (R2)
KeyB=
KeyC=51,0 (Triangle)
KeyD=48,0,49,0 (Square) (X)

PS4 Buttons

4,-500 (L3 Up)
4,500 (L3 Down)
0,-500 (L3 Left)
0,500 (L3 Right)
8,-500 (R3 Up)
8,500 (R3 Down)
12,-500 (R3 Left)
12,500 (R3 Right)
32,0,32,4500,32,31500 (D-pad Up)
32,22500,32,18000,32,13500 (D-pad Down)
32,27000,32,31500,32,22500 (D-pad Left)
32,4500,32,9000,32,13500 (D-pad Right)
48,0 (Square)
49,0 (X)
50,0 (Circle)
51,0 (Triangle)
52,0 (L1)
53,0 (R1)
54,0 (L2)
55.0 (R2)
56,0 (Select/Share)
57,0 (Start/Options)
58.0 (L3)
59,0 (R3)
60,0 (Touchpad)
61,0 (Playstation Button)

Special thanks to Kalash49 for assistance in creating a gamepad profile for the PS4 controller.

Hello everyone!
Due to the added controller support for Xbox 360 controllers (which I'm guessing was done by enabling x-input) I was able to add and configure my PS4 controller to work.

However, when trying to configure the controller in the game under the controller tab (press F2), you will only be able to set the analogue sticks for use for some odd reason. I took it upon myself to configure the bio3.ini file (should be in the game installation folder etc (C:)/Program Files(x86)/CAPCOM/BIOHAZARD 3).

This is the customisation I set up:

The PS4 controller will either be named "Wireless Controller" or "6 axis 14 button device with hat switch"

[6 axis 14 button device with hat switch]
Key1=4,-500
Key2=4,500
Key3=0,-500
Key4=0,500
Key5=
Key6=50,0,51,0 (Circle) (Triangle)
Key7=54,0,57,0 (L2) (Start)
Key8=52,0 (L1)
Key9=53,0 (R1)
KeyA=55,0 (R2)
KeyB=
KeyC=51,0 (Triangle)
KeyD=48,0,49,0 (Square) (X)
[Wireless Controller]
Key1=4,-500
Key2=4,500
Key3=0,-500
Key4=0,500
Key5=
Key6=50,0,51,0 (Circle) (Triangle)
Key7=54,0,57,0 (L2) (Start)
Key8=52,0 (L1)
Key9=53,0 (R1)
KeyA=55,0 (R2)
KeyB=
KeyC=51,0 (Triangle)
KeyD=48,0,49,0 (Square) (X)

PS4 Buttons
4,-500 (+Y)
4,500 (-Y)
0,-500 (+X)
0,500 (-X)
48,0 (Square)
49,0 (X)
50,0 (Circle)
51,0 (Triangle)
52,0 (L1)
53,0 (R1)
54,0 (L2)
55.0 (R2)
56,0 (Select/Share)
57,0 (Start/Options)
58.0 (L3)
59,0 (R3)
60,0 (Touchpad)
61,0 (Playstation Button)

To run this mod you'll need to extract the .PK3 from .ZIP and then download a source port. GZDoom is a good one: Devbuilds.drdteam.org
To run GZDoom you'll need the Doom IWAD, drag the .PK3 over the GZDoom.exe and select doom when/if the text box pops up.