Contains all files for the ST CoP Weapon Pack Version 2.9.0.6 Patch, the updated AtmosFear 3 Compatability Patch, aswell as my english translation. You will still need the main mod, this is just a patch!
You will still need to install version 2.9 which can be found here:
Moddb.com
Changelog for version 2.9.0.6 (translated with google translator):
Pastebin.com
Order of installation:
- AtmosFear 3 (optional)
- Absolute Nature 4 (optional)
- Absolute Structures (optional)
- STCoP Weapon Pack 2.9
- STCoP Weapon Pack 2.9.0.6 Patch
- Compatability Patch for AtmosFear 3 from 2.9.0.6 Patch (should you use AtmosFear3)
- Translation from Patch 2.9.0.6
This download also contains the new version of the translation. I added a new weapon description and tweaked a handfull of descriptions based on the changes from the update. The 2.9.0.5 patch and it's translation are not needed anymore. Just install the main mod and install 2.9.0.6 patch and translation on top.
Big thanks to the User elEscobars for updating the compatability Patch!
The original auther of the mod is the user Gaz1k!
You can give the devs feedback over at the original page:
Ap-pro.ru
If you have any questions feel free to ask, though keep in mind I did not create this mod.
I only provide the files aswell as my own english translations. :)
UPDATE:
There has been another patch, version 2.9.0.9 Link to download:
Moddb.com
where do you get the Compatability Patch for AtmosFear 3
It's in the download for the main mod which can be found here:
Moddb.com
Should you have any further questions, feel free to ask :)
It's different!
It needs to be updated to 2.9.0.6. Some weapons names changed in "xr_conditions.script" and an small change in "ui_main_menu.script".
I just created a personal patch for myself butI don't have anywhere I could upload it to or I would share.
You do need that patch if you have atmosphere or the game crashes after applying this patch to the full version.
I just went through this a couple hours ago myself. Hope thew info helps
:)
Oh, thats very good to know!
I assumed the old compatability patch would still work since the original mod page doesn't provide a new version.
Mhh any possibility you could maybe find a way to upload it somewhere? That would be extremly helpfull. Otherwise I'm gonna take a look over the next few days though I don't have much time right now.
Hello! First of all, thank you very much for your work. I've yet to test your translation thoroughly, but from what I've seen so far, everything seems fine.
I hope you don't mind, but following on the Guest's indications I've taken the liberty of patching the files myself. It's fairly simple, all I did was replace the weapon names they mentioned from the "xr_conditions.script" original 2.9.0.6 patch into the same file from your Atmosfear 3 patch. I didn't notice any differences in the "ui_main_menu.script" file unless they were referring to the version handler that shows up in the bottom of the main menu screen, which I changed as well to show the proper version (2.9.0.6).
I've uploaded them to my personal Google Drive so you can update your main post. You can download the modified file below:
Drive.google.com
Everything loaded properly on starting a new game. I would test it further, but I don't have as much time to play as I would like at the moment. I quickly ran up to the sawmill (zombies spawn with a lot of different weapons) and everything worked as expected during the firefight.
Keep up the good work!
Perfect, thx!
I will update the post with your fix. Might take a couple of days as I am in the middle of my exams this semester. Still thanks a lot, gonna credit you on the page aswell :)
No, thank you! I love STCoP, and I'm glad I can help bring it to English speaking audiences. The day's been a little slow and I've updated the translation for 2.9.0.8 now. There's a Remington 700 in the mod now (which is amazing).
If you'd like, I could give you my files for that as well. Keep in mind I don't know any Russian and English isn't even my first language, so I relied very heavily on Google Translate to get an idea as to what the new lines of dialogue and descriptions actually said. I might've missed something, but I definitely covered all changes listed in the changelog. And most importantly, of course, it doesn't crash the game (lol).
I'd love to help you as much as I can to maintain this translation up to date. So if you ever need any help at all, please, don't hesitate to ask!
If you want you can give me your updated files and I can upload them right away. That would most likely accelerate things since the earliest I can look into it is in about a week. With your files I can probably just upload them right away.
Also thanks a lot for offering your help in general.
Since doing this isn't too much work to maintain so far I'll try and keep this translation and files updated for as long as I can :)
Tbh. I really didn't expect them to even update the version at all since it seemed to been kinda stuck on version 2.9.0.5. All of the sudden there are new updates coming in. ^^
Sweet! Here's the new version:
Drive.google.com
It's good news that development is picking up again. There are some unfinished weapons in the files that at least they still may want to work on. By now, I've spent a bit more time running around with this configuration and I haven't stumbled into any problems so far. I'm planning on sinking into the game over the weekend and just enjoy the weapons in all their glory.
I hope you do well on your exams! Until next time.
Thanks, gonna upload those in the evening today. :)
Just a small heads up. I actually finished the game with AtmosFear, Absolute Nature, Absolute Structures and STCoP 2.9.0.5 and I had some crashes in the second area Yanov. It was mostly when I entered a specific area and when I came back later it worked again so I am not really sure what the issue was. The game didn't provide and usefull crash logs sadly. In the end I was able to fully complete the game though including all the sidequests.
P.s.: I'm gonna assume the Compatability Patch for version 2.9.0.6 still works for 2.9.0.8, right?
Thanks, I'll keep that in mind when I get to play. And the answer is yes, I looked over the files from the 2.9.0.8 update and none of the .script files seem to have changed much. Not too sure on the "particles.xr" file (no idea how to look at those types of archives). The patch for Atmosfear on the modders' main site hasn't been updated, however, and doesn't work with 2.9.0.6 or 2.9.0.8.
Yeah you would think they would update the Patch themselves one day. Oh well.
How install now with atmosfear? Compaitiblity patch is updated?
Pls, I cant wait to play, how Inmstall now? I'm confused about all this versions, un russian side stand now some about 2.9.0.8...
Yeah there seems to have been an update in the last few days. Gonna look into that once I am done with my exams :)
Found a small mistake with the translation: the standard 9x18mm FMJ rounds are named 9x19mm FMJ in the inventory window, despite weapons calling for 9x18mm working with them. I fixed it myself, just a matter of changing a character in "st_items_weapons.xml".
Thanks, gonna look into that the next few days and reupload a fixed version :)
Didn't have much to do today so I merged "STCoP Weapon Pack 2.9.08 Fix" into "STCoP_Weapon_pack_2.9_Full". I created a patch for "Atmoshere 3" for 2.9.08 and added elEscobars's Translation for 2.9.08. I found out there is a new scope reticle for the eotech and mounted on the m249 it seems distorted. I added an optional fix that uses the original hud from "STCoP_Weapon_pack_2.9_Full" for the 249. I updated the instillation text but not the Russian change logs to reflect 2.9.08.
It seems to be running fine and I merged it deep into an existing game.
I just wish I had an uploading site. I'm not fond of Google so that's out and since I merged the whole thing it's huge (805MB).
Edit:
Just found out you have to replace all "wpn_*_eot_hud.ogf" (* is weapon name) files from 2.9_Full on top of 2.9.08. Thought it was just the m249 but it's any weapon that can be upgraded to EOT scope. It's something in the new mesh files that is distorting the new reticle. I've updated my patch to reflect this. I just wish I had some way of uploading this for people to test.
Have you tried some sort of hoster like mediafire or something like that?
Please Test! Been working for me.
STCoP_Weapon_pack_2.9.08_Full: (Have to add https ww before below link. Won't let me add link to guest account.)
mediafire.com/file/ljx72mbcfyf23dp/STCoP_Weapon_pack_2.9.08_Full.7z
Anything specific you want people to test for or just in general if it's working? :)
It's just the full version patched to 2.9.08. It's a "one and done". I noticed as my previous post was waiting approval that you put out a new patch. My full version seems to be working for me and you said you were busy so I whipped that together but since you have the patch now it's a bit redundant unless someone wants to archive it for future installs.
Have you noticed what I was talking about with the new reticle for the eto? If so then there is a patch inside that will swap back the old meshes for eto. I actually prefer them as well but that just personal to me. I'm downloading your patch and I'm going to compare what I have to see if there is any difference, maybe my patch job was bad for the eto.
Edit:
I did have two mistakes in the above file after comparing with yours. Both minor but corrected. I'll upload the new file to mediafire if anybody's interested. Since you have the patch now I think it would be redundant though.
I think it's still a neat idea to have it in 1 installer, though it is a bit redundant now that the new patch is out. I thought about doing a "one and done" version aswell, however it's just too much work to maintain I feel. Plus this way people can download older patches more easily.