The texture modification "Dead Zone" immerses you in the atmosphere of the abandoned and forever abandoned world of the exclusion zone, and only in some locations green grass breaks through, but not for long. The most terrible emission took place in the zone, the zone changed forever and plunged into darkness. Plunge into the world of the dead zone and let it be creepy and scary. The zone is now sad, depressive, there are practically no leaves on the trees, the grass is dry, the ground is scorched by radiation, the asphalt is completely destroyed, the zone is just all rusty from acid precipitation. Buildings and wall surfaces are faded, dirty, stones at the locations are covered with moss and corrosion. There is only death and radiation around.
![Dead Zone]()
The texture modification "Dead Zone" immerses you in the atmosphere of the abandoned and forever abandoned world of the exclusion zone, and only in some locations green grass breaks through, but not for long. The most terrible emission took place in the zone, the zone changed forever and plunged into darkness. Plunge into the world of the dead zone and let it be creepy and scary. The zone is now sad, depressive, there are practically no leaves on the trees, the grass is dry, the ground is scorched by radiation, the asphalt is completely destroyed, the zone is just all rusty from acid precipitation. Buildings and wall surfaces are faded, dirty, stones at the locations are covered with moss and corrosion. There is only death and radiation around.
Changes
Made a complete retexturing of the zone, created new textures of brick walls, earth, soils, fences, concrete, stones, rocks, wallpaper in the houses, asphalt, grass, the zone is all rusty, redone all machinery (rusty), redone and created new wall textures and slabs with windows in Pripyat and Dead City, replaced wall textures in Limansk. High resolution textures. Replaced all. This modification is universal, it fits all parts of STALKER.
OPTIMIZATION
In the standard for each texture in the thm file in addition to prescribed bump, the developers have on the texture itself impose additional texture details, that is, for concrete texture overlay material that they think will make the effect that should be in the form of concrete, but in fact the texture visually becomes worse, of all thm files have removed this additional material, respectively, the load on the system is now a fraction less. Accordingly, and fps higher. Thus, my texture pack less load on the system without loss of quality, unlike other texture mods.
REALISM
If my work is compared to other texture packs, such as Western mods, in my packs I use real materials that were used in the construction of the former Soviet Union and the Ukraine. This also applies to asphalt, soils, vegetation. In Western mods moddemakers use materials that have never been in the former Soviet Union and Ukraine. Therefore, the zone does not correspond to the realities. In my case, the exclusion zone with my pack looks realistic.
Dead Zone content:
- Ivan Danko textures and retexturing Discord.gg
- Ivan Danko video menus and loading screens
- Ivan danko new bicubic grass
- New Anomaly Particles by FEAR build
- Shaders from the FEAR build
- "CINEMATIC VFX" PARTICLE EFFECTS ADDON Moddb.com
- Abnormal Weather Moddb.com
- Shaders by Manuel SCREEN SPACE SHADERS v.15.3 (Moddb.com)
- Dynamic FOG by Fabio Conte (Moddb.com)
- Falling leaves and crickets by JDUD Moddb.com
- Glowstick (Moddb.com)
- Beef's NVG (Moddb.com)
Minimum requirements:
Processor - Intel(R) Core(TM) i5-9300H CPU @ 2.40GHz
16.0GB RAM
Video card - NVIDIA GeForce GTX 1650 (4GB)
DEAD ZONE is designed to play at least on DIrectX 11
DEAD ZONE is DEVELOPED FOR GAME ONLY ON DirectX11. STRICTLY FOLLOW THE INSTRUCTIONS TO INSTALL AND CONFIGURE THE MODIFICATION (if you don't follow my instructions there will be problems with lighting, let's avoid unnecessary questions) DEAD ZONE IS NOT COMPATIBLE WITH OTHER TEXTURE PACKS, VEGETATION, WEATHER CONDITIONS, OTHER SHADERS DO NOT USE ANY RESHADES, the lighting is set up perfectly for dead zone.
![discord logo color wordmark 1]()
![YouTube Logo 2017 svg 1]()
![604cba665e98883d717e6c9a screens]()
![donate]()
![2]()
![panel 100814987 image a4e6d0d7 e]()
Installation and startup procedure for Anomaly vanilla
![Dead Zone VANILLA]()
1. Download Dead Zone, open the archive, go to the folder Dead Zone, and copy the folders src, bin, appdata in the folder with the game, then go to the folder mods/DeadZone and copy the folder gamedata in the folder with the game.
The first launch of the game after the Dead Zone installation:
1. Run the game with the Anomaly Launcher, put a tick mark on Delete Shader Cashe and run the game (MUST).
Light Configuration (MUST):
1. Go into the game, open the console and enter the command cfg_load dead
2. The brightness settings in the game, adjust yourself for your comfort perception
3. In SSAO mode select SSDO
Installation and startup procedure for EFP 4.0:
![Dead Zone EFP]()
- Download Dead Zone, open the archive, go to the folder Dead Zone, and copy the folders src,bin,appdata in the folder with the game, copy the folder mods in the folder with the game in MO2.
- Go to the folder with the game\MO2\mods\SUNRISE\gamedata\scripts and delete the file "trader_autoinject.script". (MUST)
- Run MO2, go to the bottom of the list and turn on the Dead Zone addon.
PREREQUISITE FOR PLAYING WITH DEAD ZONE FOR EFP 4.0
1. Start MO2, go to Visuals and turn off addons:
- [Awene] Agressor - Custom Weather
- [Iretuerye] Golden Autumn Retexture
- [Beef] NVGs (DX10-11 Only) [Haruka Update]
- [KennShade] ES PBR (DX10-11 Only)
- [KennShade] ES PBR - Color Grading
- [KennShade] ES PBR - Cubemaps
- [KennShade] ES PBR - Shader Params
- [Beef] NVGS - ES (DX10-11 Only)
- [Joe325] Nicer Reflections
- [Ascii1457] Screen Space Shaders v11.6 (Full) (DX10-11 Only)
- [LVutner] Optimized SunraysSunshafts
Go to section AUDIO and turn off addon:
- [Solarint] Soundscape Overhaul - Thunder
The first launch of the game after the Dead Zone installation:
1. Run the game with the Anomaly Launcher, put a tick mark on Delete Shader Cashe and run the game (MUST).
Light Configuration (MUST):
1. Go into the game, open the console and enter the command cfg_load dead
2. The brightness settings in the game, adjust yourself for your comfort perception
3. In SSAO mode select SSDO
Installation and startup procedure for GAMMA:
![Dead Zone GAMMA]()
- Download Dead Zone, open the archive, go to the folder Dead Zone, and copy the folders src, bin and appdata in the folder with Anomaly, then copy the folder mods in the folder where you installed GAMMA.
- Go to the folder with the gamma\mods\SUNRISE\gamedata\scripts and delete the file "trader_autoinject.script". (MUST)
- Run MO2, go to the section (G.A.M.M.M.A. Disabled) at the bottom of the list and turn on - addon Dead Zone.
- Then in MO2 MUST disable addons:
section - (G.A.M.M.A. Fixes) - addons:
- G.A.M.M.A. Weathers
- LVutner's Shader Corner Shadow Fix
- Improved Jaku shaders v1.2
- 188- Enhanced Shaders - KennShade
- 189- Beef's NVG - theRealBeef
- 190- Screen Space Shaders - Ascii1457
- 290- Atmospherics Shaders Weathers and Reshade - Hippobot
section - (224- New added addons) - addons:
- 241- Simple autumn retexture without leaves - Daedalus-Prime
- 242- Gardener Zone Texture) - YuriVernadsky
- 272- Grulag's Dead Bushes - Grulag
- Cumulative shader pack for GAMMA
section - 21 - Visual:
- 37- Dynamic Tonemap Extended - TheMrDemonized
The first launch of the game after the Dead Zone installation:
1. Run the game with the Anomaly Launcher, put a tick mark on Delete Shader Cashe and run the game (MUST).
Light Configuration (MUST):
1. Go into the game, open the console and enter the command cfg_load dead
2. The brightness settings in the game, adjust yourself for your comfort perception
3. In SSAO mode select SSDO
AFTER EACH GAMMA UPDATE YOU NEED TO DISABLE THE ADDONS AGAIN
![Download Now Button PNG Free Dow]()
Dead Zone Update for Anomaly 02/05/23
Changes:
1. New textures (concrete, walls, bricks)
To install the update:
1. See the installation instructions section, apply only the first points of the installation, disable again addons in the modifications is not necessary.
![604cba665e98883d717e6c9a screens]()
![Download Now Button PNG File]()
THE UNIVERSAL VERSION OF "DEAD ZONE" FOR ALL MODIFICATIONS AND PARTS OF THE GAME STALKER
![Dead Zone]()
DOWNLOAD LINK AT THE END OF THE DESCRIPTION
Спасибо. Нравятся ваши работы и всегда играю с ними
Спасибо.
nice bro
Привет а где можно скачать старую версию она хорошо работала на 9 директе?
Discord.gg
Спасибо за аддон, люблю мёртвую растительность.
insane work :) Tell mi somethink Ivan why when i download DeadZone clean one i got leaf on trees smth they disapire...
Because the modification includes dead zone vegetation
Installation and startup procedure for EFP 4.0:
1. Download Dead Zone, open the archive, go to the folder Dead Zone, and copy the folders src,bin,appdata in the folder with the game, copy the folder mods in the folder with the game in MO2.
2. Go to the folder with the game\MO2\mods\SUNRISE\gamedata\scripts and delete the file "trader_autoinject.script". (MUST)
3. Run MO2, go to the bottom of the list and turn on the Dead Zone addon.
PREREQUISITE FOR PLAYING WITH DEAD ZONE FOR EFP 4.0
1. Start MO2, go to Visuals and turn off addons:
-[Awene] Agressor - Custom Weather
-[Iretuerye] Golden Autumn Retexture
-[Beef] NVGs (DX10-11 Only) [Haruka Update]
-[KennShade] ES PBR (DX10-11 Only)
-[KennShade] ES PBR - Color Grading
-[KennShade] ES PBR - Cubemaps
-[KennShade] ES PBR - Shader Params
-[Joe325] Nicer Reflections
-[Ascii1457] Screen Space Shaders v11.6 (Full) (DX10-11 Only)
-[LVutner] Optimized SunraysSunshafts
Go to section AUDIO:
-[Solarint] Soundscape Overhaul - Thunder
First launch of the game after installing DEAD ZONE:
1. Launch the Anomaly Launcher, tick the Delete Shader Cashe checkbox and start the game (MUST)
Installation and startup procedure for GAMMA:
1. Download Dead Zone, open the archive, go to the folder Dead Zone, and copy the folders src, bin and appdata in the folder with Anomaly, then copy the folder mods in the folder where you installed GAMMA.
2. Go to the folder with the gamma\mods\SUNRISE\gamedata\scripts and delete the file "trader_autoinject.script". (MUST)
3. Run MO2, go to the section (G.A.M.M.M.A. Disabled) at the bottom of the list and turn on - addon Dead Zone
4. Then in MO2 MUST disable addons:
section - (G.A.M.M.A. Fixes) - addons:
- G.A.M.M.A. Weathers
- LVutner's Shader Corner Shadow Fix
- Improved Jaku shaders v1.2
section - (224- New added addons) - addons:
- 241- Simple autumn retexture without leaves - Daedalus-Prime
- 242- Gardener Zone Texture) - YuriVernadsky
- 272- Grulag's Dead Bushes - Grulag
- Cumulative shader pack for GAMMA
section - (187- Shaders) addons:
- 188- Enhanced Shaders - KennShade
- 189- Beef's NVG - theRealBeef
- 190- Screen Space Shaders - Ascii1457
section - 21 - Visual: 37- Dynamic Tonemap Extended - TheMrDem AFTER EACH GAMMA UPDATE YOU NEED TO DISABLE THE ADDONS AGAIN===
Why does this mod disappear and appear all of the time? i could of swore this was uploaded 6-8 months ago.
This is the final version
Dead Zone have been updated
Changes:
1. New textures (concrete, walls, toilets, sinks, phone booths, soda machine.
Screenshots
Discord.gg
Who wants the new version, you need to remove the old version completely, download the new version and reinstall
Dead Zone Update for Anomaly 02/05/23
Changes:
1. New textures (concrete, walls, bricks)
To install the update:
1. See the installation instructions section, apply only the first points of the installation, disable again addons in the modifications is not necessary.
Download:
Drive.google.com
How do i install the actual mod i only have a text file
the google drive link is down
cant download the pack anymore :(
разраб укроп
This comment is currently awaiting admin approval, join now to view.