Relive the Original C&C3; Tiberium Wars Universe, from a new perspective.

Report content RSS feed User Guide and Tips For C&C3 A New Experience.

Discover the new world of C&C3 NE, In the right way with this small guide.

Posted by on




Commander,

Here are a small guide of questions and answers to common issues that you may experience.

In most cases the solution is simpler than it looks, and will not be a rival for you.





http://media.moddb.com/images/groups/1/5/4666/cooltext620720766.png

I run "C&C A New Experience" from the laucher,

but the MOD is not executed.

Instead start the C&C3 Tiberium Wars... Why?.



http://media.moddb.com/images/groups/1/5/4666/cooltext620721145.png

This is a very common problem.

The solution is simple.

You need to correctly install the patch 1.09 for C&C3 Tiberium Wars.

Get the patch from the following link:

Fileplanet.com

Or you can choose your own download provider, this is mearly a recommended link.





http://media.moddb.com/images/groups/1/5/4666/cooltext620720766.png

Sometimes the laucher menu stops responding and is branded. I use Windows Vista or 7



http://media.moddb.com/images/groups/1/5/4666/cooltext620721145.png

Perhaps this is due to an incompatibility of the audio codec and decompressor installed on your computer. Test run the "menu Laucher" "as administrator" and try again.







http://media.moddb.com/images/groups/1/5/4666/cooltext620720766.png

The Gameplay is slow ... I have lag.



http://media.moddb.com/images/groups/1/5/4666/cooltext620721145.png

The new features, such as Ω Omega Cam, including in "C&C3 NE",

require a greater requirement of graphics card and ram,

in comparison to the old C&C3.

To resolve this you should simply adjust your graphical settings to meet with the newer requirements.

This mod supports setting changes without any problem, unlike many other mods, which crash the game upon changing graphics settings.





http://media.moddb.com/images/groups/1/5/4666/cooltext620720766.png

Sometimes the camera zoom down too low surpassing the ground.



http://media.moddb.com/images/groups/1/5/4666/cooltext620721145.png

The camera is always looking to adapt to your target area. Being stored in the memory of the camera, the last minimum height that you use. To reset the memory, simply press the "5" key on the keypad, or the central button of your mouse.






http://media.moddb.com/images/groups/1/5/4666/cooltext620720766.png

I can't see the sky, the rain or other special effects.



http://media.moddb.com/images/groups/1/5/4666/cooltext620721145.png

Important Issue:

To enjoy all the new features in the "C&C3 NE",

it is necessary to maintain the option "VFX DETALLE"

( In the configuration menu),

always in "medium quality", "high" or "more"






http://media.moddb.com/images/groups/1/5/4666/cooltext620720766.png

I can play the secret campaign of race "Scrin" without having to complete the entire game again?


http://media.moddb.com/images/groups/1/5/4666/cooltext620721145.png

You can:

Step 1:

Make a backup
of the 'ProfileData.ini' file located in:

Windows XP
C:/Documents and Settings/[USERNAME]/Application/ Data/Command & Conquer 3 Tiberium Wars/Profiles/[PROFILE NAME].

Windows Vista or Seven
C:\Users\[USERNAME]\AppData\Roaming\Command & Conquer 3 Tiberium Wars\Profiles/[PROFILE NAME].

Tip: You may need to 'Show Hidden Files' in Folder Options if you cannot see the Application Data folder.

Step 2:
Overwrite the ProfileData.ini file with the one included in this archive.

ALTERNATELY: Open your existing ProfileData.ini file with Notepad and change all numbers to '9'. There should be 16 numbers total. For example your file may look like this:

PPK = 3139777886553609

change it to:

PPK = 9999999999999999

Step 3:
Load the game. The Scrin campaign should now be playable.

DISCLAIMER: While we didn't notice any other changes to our game's settings, campaign, stats, etc. This does not mean that unlocking the Scrin campaign is the only side effect to changing this file. ALWAYS MAKE A BACKUP IN CASE SOMETHING ELSE IS CHANGED! Another option would be to create an entirely new Profile in the game and use this cheat with the new profile.




http://media.moddb.com/images/groups/1/5/4666/cooltext620720766.png

I can run C&C3 A NEW EXPERIENCE, from the original Laucher, like other mods?



http://media.moddb.com/images/groups/1/5/4666/cooltext620721145.png

If, to achieve this you simply need to copy the folder "C&C3 A NEW EXPERIENCE" (located in the installation directory of your C&C3 tiberium wars), and paste it into the folder "mods" of tiberium wars, located in "my documents".





http://media.moddb.com/images/groups/1/5/4666/CCNE02CHICO.png


If you have a problem that is not listed in this guide, you can ask for support in the Forum






Comments
CM32
CM32

Heres a question..

Is it possible to use this with other mods?

Reply Good karma Bad karma+1 vote
OmegaGroup Author
OmegaGroup

It is possible... But it depends on "of the mod", which will be the maximum compatibility (Omega Cam will be compatible with all... I think)...

Reply Good karma+2 votes
X3N Creator
X3N

Read this ;) :
Moddb.com

---
then we will give more details thereon :)

Reply Good karma+1 vote
CrowV
CrowV

is it possible to apply the omega cam to cnc generals?

Reply Good karma Bad karma+3 votes
X3N Creator
X3N

Omega Cam is a simple modification of code. Your just have to ask him to any modder of cnc generals ;) :
Moddb.com

Reply Good karma+2 votes
CrowV
CrowV

OK THANKS DUDE'

Reply Good karma Bad karma+2 votes
LexXuzZ
LexXuzZ

Hi guys.
Heres a question.
Is it possible to use without the camera, but with the hud?

Reply Good karma Bad karma+1 vote
OmegaGroup Author
OmegaGroup

Sure:
You can use only OmegaCam without the new interface. In the guide said as: Moddb.com
You should merge only "CORE_1.0.big" by adding the line: "Add-config CORE_1.0.skudef"

Reply Good karma+1 vote
LexXuzZ
LexXuzZ

and only the interface?

Reply Good karma Bad karma+1 vote
OmegaGroup Author
OmegaGroup

Example for omega interface:
Open the .skudef file of the interface that you want to use (OMEGA_1.0.skudef) and delete the line:

add-config CORE_1.0.skudef

Then Open the .skudef file of your favorite mod and add the line:
add-config OMEGA_1.0.skudef

Ready, your favorite mod this joined to the omega interface.
Do you understand the mechanism? :-)

Reply Good karma+1 vote
LexXuzZ
LexXuzZ

Yes, thanks :)

Reply Good karma Bad karma+2 votes
UmbrellaSecrets
UmbrellaSecrets

I was wondering, is it possible to add a new UI to a new faction?

Reply Good karma Bad karma+2 votes
OmegaGroup Author
OmegaGroup

I am sorry. That would be a very advanced modification. According to experts, it is not possible.

Reply Good karma+1 vote
masin637
masin637

Can I Use This mod With Tiberium Essence Mod V1.6

Reply Good karma Bad karma+1 vote
X3N Creator
X3N

HI BRO!
IF YOU CAN :D : Moddb.com

Reply Good karma+1 vote
Post a comment
Sign in or join with:

Only registered members can share their thoughts. So come on! Join the community today (totally free - or sign in with your social account on the right) and join in the conversation.

Icon
C&C3: Tiberium Wars
Developer
Omega Group
Contact
Send Message
Homepage
Moddb.com
Release date
Mod watch
Start tracking
Feature
Browse
Features
Share
Related Games
C&C3: Tiberium Wars
C&C3: Tiberium Wars Real Time Strategy
Related Groups
Omega Group
Omega Group Developer & Publisher