Post news RSS Men of War - Civil War mod Weapons

Information on the weapons needed for modelling and texturing ..

Posted by on

BLUE = NOT DONE RED = DONE BEING MADE

Hawken rifle

Type Rifle, Long Rifle, Place of origin Unites States
Designer: Samuel Hawken
Designed1823
Number built Approximately 200
Variants Double set trigger

WeightApproximately 10-15 pounds
Effective range400 yards
Feed systemMuzzle loaded
SightsOpen blade sight

Springfield Model 1861

Type: Rifle Musket ,Place of origin United States

Designed1861
Produced1860-1872
Number built~1,000,000

Weight9 pounds (4.1 kg)
Length56 inches (1,400 mm)

Cartridge.58 minie ball
Caliber.58 inches (15 mm)
Rate of Fire: 2-3 round/min
Effective range100 to 400 yards (91 to 370 m)Maximum range900 to 1,000 yards (820 to 910 m)
Feed system: Muzzle Loaded

Pattern 1853 Enfield
Type: Rifled Musket, Place of origin:United Kingdom United Kingdom

In service1853–1871
Designer: RSAF Enfield
Designed1853
Produced1853-1867
Number builtapprox 1,500,000
Variants: Carbine

Weight9.5 pounds (4.3 kg) unloaded
Length55 inches (1,400 mm)

Maximum range2,000 yards (1,800 m)
Cartridge: .577 ball
Calibre: .58 inches (15mm)

Whitworth rifle

Type: Rifled Musket: Place of Origins United Kingdom, United Kingdom

Used by: The Confederate States of America

Designer: Josepth Whitworth:
Designed: 1854-1857
Produced: 1857-1865
Number built: 13,400
Length49 in (1,200 mm) Barrel length33 in (840 mm)
Cartridge: .45 caliber bullet
Calliber: 0.451 inches (11.5 mm)
Action: Muzzle loaded

Henry rifle
Type: Lever Action, Place of origin USA

Produced1850s to 1866
Number built14,000 approx.

Designed1850s
Rate of Fire: 28 rounds per minute
Feed System: 16 round tube magazine

Colt revolving rifle

Type, Rifle, Place of origin United States
In service1838 to 1863
Cartridge: .36, .44, or .56

Spencer repeating rifle

Type: Manually cocked Lever Action Rifle, Place of origin United States
Designer: Christopher Spencer
Designed: 1860
Manufacturer: Spencer company, Burnside Rifle Co, Winchester
Produced1860-1869
Number built200,000 approx.
Length: 30 inches (760 mm)
Barrel length22 inches (560 mm)
20 inches (510 mm

Cartridge 56-56 Spencer rimfire
Caliber.52 inches (13 mm)
Action:Manually cocked hammer, lever action
Rate of fire:14 or 20 rounds per minute

Effective Range: 200 yards

Ketchum Grenade

A grenade used in the civil war for several major sieges by the Union
Gatling gun

Type, rapid-fire gun, Place of origin United States

Weight:27.2 kg
Length:107.9cm
Barel length: 67.3cm
Crew: four man crew

Lematt revolver:

Type: Grapeshot Revolver/Service Pistol: Place of origin Confederate States of America
France
In service1861–65
Used byConfederate States of America

Designer: Jean Alexandre LeMat
Designed1855
ManufacturerJohn Krider of Philadelphia
Charles Frederic Girard and Son of Paris
London Armoury Company

Produced1856–65
Number builtapprox 5 000
VariantsRevolver
Carbine

Cartridge.42 Ball (.44 repro) or .36 ball
16ga Shot
Caliber.42/.44 (repro)/.36
16ga Shot

Effective Range: 40 yards

Artillery:

6 Pounder
M1857 12-pounder "Napoleon"
12-pounder Howitzer
12-pounder Mountain Howitzer
24-pounder Howitzer
10-pounder Parrott rifle
3-inch Ordnance Rifle
14-pounder James Rifle
20-pounder Parrott rifle
12-pounder Whitworth breechloading rifle

Comments
DaggerClassStudio Author
DaggerClassStudio - - 649 comments

List of main weapons that will be used within the modification:

More arms are to be added shortly such as side-arms, and more carbines/rifles/shotguns.

Reply Good karma+1 vote
Chompster
Chompster - - 4,310 comments

nice list :)

does it matter which someone would start with? don't want to end up working on something someone else is.. lol

Reply Good karma Bad karma+1 vote
multimarcus111
multimarcus111 - - 170 comments

I believe DaggerClassStudio & Me will be assigning the certain models to our modelers when we are ready

Reply Good karma Bad karma+1 vote
Chompster
Chompster - - 4,310 comments

alright sounds good :)

Reply Good karma Bad karma+1 vote
CrashToDesktop
CrashToDesktop - - 1,241 comments

Erm, the Henry Rifle is already done. xD But if someone else wants to take a whack at it, go on ahead.

Reply Good karma Bad karma+1 vote
DaggerClassStudio Author
DaggerClassStudio - - 649 comments

lol =) I already know that, so that is kinda on my tick list haha :D .. So yer guys, the Henry Rifle is finished now .. just waiting for it to be exported then it can be textured :)

Reply Good karma+1 vote
DaggerClassStudio Author
DaggerClassStudio - - 649 comments

Modellers will create the weapons, whilst the texturers will texture the models to near perfection :) .. Will be appointing you models shortly

Reply Good karma+2 votes
CrashToDesktop
CrashToDesktop - - 1,241 comments

OK, Ketchum Bomb done. Sorry, I did it out of boredom...again. I couldn't take any development screens, since my Bandicam crapped out. Also, it only has three main pieces. The handle, the bomb, and the detonator. Can I place the henry rifle and ketchum bomb into the dropbox?

Reply Good karma Bad karma+1 vote
DaggerClassStudio Author
DaggerClassStudio - - 649 comments

certainly.....Just take 3 images of the different parts of the grenade then by taking it apart to take the screen grabs, and include that with the Grenade and Henry Rifle

Reply Good karma+1 vote
CrashToDesktop
CrashToDesktop - - 1,241 comments

OK...but include it with the henry rifle? what'd you mean?

Reply Good karma Bad karma+1 vote
Chompster
Chompster - - 4,310 comments

the 6 Pounder is also finished, unless someone see's anything that i didn't put or needs to be removed.

i can export it in .3ds format so someone can then take and texture it but in which folder do i put it?

Reply Good karma Bad karma+1 vote
DaggerClassStudio Author
DaggerClassStudio - - 649 comments

The actual finished gun .. as a file on the drop box site.

Reply Good karma+1 vote
CrashToDesktop
CrashToDesktop - - 1,241 comments

OK, just to ask, are we going to just re-model the rifle ammo to look like the Minie Ball or are we making a totally separate ammo?

Reply Good karma Bad karma+1 vote
DaggerClassStudio Author
DaggerClassStudio - - 649 comments

I will check it out but maybe re-texture .. although it will have to be realistically textured not to look like world war 2 ammo :) ..

So probably to save time we will re-texture unless it is quicker to make new ammo :D

Reply Good karma+1 vote
CrashToDesktop
CrashToDesktop - - 1,241 comments

Is anyone making the Pattern 1853 Enfield? IF no one is, I'm gonna do it.

Reply Good karma Bad karma+1 vote
Post a comment
Sign in or join with:

Only registered members can share their thoughts. So come on! Join the community today (totally free - or sign in with your social account on the right) and join in the conversation.