Here's patch 0.5P2 alpha.
Live for Speed S2 ALPHA PATCH 0.5P2
Welcome to Live for Speed!
This is Live for Speed S2 ALPHA.
ALPHA means : LFS S2 is still in the testing and development stage.
This software comes with no warranties of any kind.
By installing this software you agree that you do so at at your own risk and you accept full responsibility for any damage caused by the use or installation of the software.
The producers of the Live for Speed racing simulator make every effort to ensure the program is safe but can not accept any responsibility whatsoever for personal injury or death that may arise during the use of the software, or any damage of any kind to your system including corrupted files, lost data or damage to hardware.
New Car Filter System (List of Games Screen)
The car filters help you find the host you want.
The QUICK method of using the filters :
Use the car class buttons on the right of the screen to
quickly set several car filters. ALL is the default.
For fine tuning or manual operation :
Click on the vertical car names in the list of games.
You can set them to GREY, BLUE or RED.
GREY : You don't mind if this car is enabled or not
BLUE : This car MUST be available on the host
RED : This car must NOT be available on the host
- Leave most of them GREY (the default colour)
- The cars you want to use, set them to BLUE
- Use RED only for cars you really don't want to see
Guests : please do join empty hosts - people will join!
Hosts : please don't allow all cars, if possible.
Restart Vote Limitations (for hosts and administrators)
/rstmin=60 : No RESTART votes for 60 seconds after start
/rstend=30 : No RESTART votes for 30 seconds after finish
Also, no restarts after finish if 2 people are still racing
FIX : Switching between SPR / MPR now resets to top of list
FIX : Overlapping text in translated Pit Instructions (F12)
FIX : Force feedback when using "/" or message to player
FIX : Tiny suspension damage causing long pit stop
FIX : Crash on clicking user buttons in host options
FIX : Bug in /exit command from Multiplayer screen
- Qualification Time and Race Laps display in F12 menu
- Pit Stop Required - message at start lasts a bit longer
- Qualifying or Race Restarts - clearly visible in garage
- Zoom keys for SHIFT+U mode : 4,5-IN / 6,7-OUT
- Increased size of MPR packet stash
Updated Text Commands
These commands can now be used in game :
/car X /setup X
New commands for setup screen / in game :
/colour X /player X
New commands with no parameter :
/join /spectate /leave
FIX : InSim excessive packet flood on race restart
FIX : Text commands can now be issued at a fast rate
InSimVer (protocol number) is increased to 2 (was 1).
/rcm MESSAGE ... set a Race Control Message to be sent
/rcm_ply USERNAME ... send the RCM to USERNAME
/rcm_all ... send the RCM to all
/rcc_ply USERNAME ... Clear USERNAME's RCM
/rcc_all ... Clear all RCMs
/pitlane USERNAME ... send username to the pit lane
/p_dt USERNAME ... give drive through penalty
/p_sg USERNAME ... give stop-go penalty
/p_30 USERNAME ... give 30 second time penalty
/p_45 USERNAME ... give 45 second time penalty
/mp LOCAL_IP_ADDRESS PORT (entry screen... join local game)
A FULL version of LFS S2 ALPHA must already be installed!
To install PATCH P2 :
1) Move the zip file into your LFS folder
2) Right click on the zip file and select "Extract to here"
NOTE : You can tell if the version is correctly installed when you run
the program (LFS.exe). At the bottom of the entry screen : 0.5P2
To run LFS S2 :
Double-click the program file LFS.exe
Note : Microsoft® DirectX® 8.1 is required and can be downloaded from
DirectX is a registered trademark of Microsoft Corporation
Unlocking the full version :
When you first run this S2 version, you will only have access to the same content that is available in the DEMO : 3 cars and 1 track area.
You need an S1 or S2 license to unlock additional content and features.
With an S1 license you can unlock 5 extra cars and 3 extra track areas.
An S2 license includes the S1 license, and allows you to unlock a further 10 cars and 3 track areas. Total : 18 cars and 7 track areas.
Game controller information :
To set up one or more game controllers :
1) In LFS options...controls select "Wheel" at the top of the screen
2) Select Combined or Separate axes to match your controller's settings
3) Select the button functions and press buttons to assign
4) Press the button "Axes" to assign axes
5) Click on the function you wish to assign to an axis
6) Move the controller to see which axis to assign
7) Click on the button next to that axis, to assign the function
8) You may need to invert some of the axes by clicking "invert"
9) You can click on "recalibrate" to adjust the calibration limits
10) For axes which need to be centred, click on the C button at centre
11) You may wish to lock calibration after calibrating your controller
12) To use a shifter, select the correct shift mode and assign gears
Force Feedback :
1) You can turn on or off Force Feedback with the on-screen switch
2) If you have more than one FF device you can select the required one
Switching to other programs :
The ALT-TAB key press is not recommended during a multiplayer game as after ALT-TAB the game is never called by the operating system and cannot maintain its connections with the other computers. Instead, please use the quick key SHIFT-F4 to temporarily run the game in a window.
SHIFT-F4 - toggle between window / full screen
Command line options :
LFS can be run from a command line or another program.
A dedicated host mode is available with no hardware draw : "nogfx".
Before selecting your options, you may find it helpful to run LFS and try out the options on the Start New Game screen - the required
upload bandwidth for those options is displayed on screen.
1) Host options :
LFS /host=test host /cars=ALL /dedicated=nogfx /maxguests=4
/host=Host Name :FIRST IN LIST
/pass=Pass :if required - password
/admin=Pass :if required - admin password
/ip=X.X.X.X :if required - local specified ip address
/port=63392 :a high number below 65536
/mode=demo :demo / s1 / s2
/usemaster=yes :no / yes / hidden
/track=Blackwood :Blackwood / Skid Pad
/config=1 :config : 1-GP / 2-RALLYX in Blackwood
/reversed=no :no / yes
/weather=1 :weather : 1,2,3 in Blackwood
/cars=[cars] :see below : "Car Strings"
/maxguests=4 :max number of guests that can join host
/carsmax=5 :max number of cars in a race
/carshost=1 :max number of cars (real+ai) on host pc
/carsguest=1 :max number of cars (real+ai) per guest pc
/pps=4 :smoothness (3-6) number of car updates per second
/qual=0 :qualifying minutes, 0 for no qualifying
/laps=5 :number of lap, 0 for practice
/wind=1 :0 no wind / 1 low wind / 2 high wind
/dedicated=no :no / yes / nogfx / invisible
/vote=yes :no / yes : can guests vote to kick or ban
/select=yes :no / yes : can guests select track
/rstmin=X :no restart for X seconds after race start
/rstend=X :no restart for X seconds after race finish
/autokick=no :no / yes / ban / spectate (Wrong way drivers)
/midrace=yes X :no / yes (Join during race)
/mustpit=no :no / yes (Pit Stop Required)
/start=finish :fixed/finish/reverse/random (Default race start)
NOTE - alternative way to use the command line options :
A command file xxx.txt can be used instead of a long command line.
The command file would contain the command line parameters.
The parameters can be spread onto several lines.
The command file can contain comments, starting with two slashes //
Then the command line would be simply :
LFS /cfg=xxx.txt (where xxx.txt is the name of the config file)
2) Guest options :
Example : LFS /join=test host
/join=Host Name :FIRST IN LIST
/pass=Optional Pass :password if required by host
3) Status file "host63392.txt" - updated whenever info changes :
63392 is the port number of the host.
The file contains the following information:
status=ingame :offline / online / ingame
guests=4 :current number of guests
maxguests=4 :maximum guests allowed
host=Host Name :game name as listed on master server
pass=Optional Pass :host password
usemaster=yes :no / yes / hidden
trackcfg=BL1 :short name for track and config
cars=[18x"0"or"1"] :cars allowed on host (0=no / 1=yes)
qual=0 :qualifying minutes
laps=5 :number of laps
conn=Host :player name
conn=Guest 1 :player name
conn=Guest 2 :player name
4) Status file "guest.txt" - exists while connected :
joined=Host Name :host name
Host commands :
You can use text commands to control normal or nogfx dedicated hosts.
Using the normal text message system (pressing T in a normal host or
simply typing into a nogfx host), the message becomes a command if you
start it with a slash character.
Simple commands with no parameter :
/restart :(re)starts the current race
/qualify :(re)starts qualifying
/end :return to entry screen
/names :toggle display between player and user names
/exit :clean exit from nogfx host (host only)
/help :get list of commands
/reinit :total restart (removes all connections)
Commands with a parameter - entry screen mode :
/track X :track and config (e.g. BL1 / SO3R / FE4)
/weather X :lighting (e.g. 1, 2, 3...)
/qual X :qualifying minutes (0 = no qualifying)
/laps X :number of laps (0 = practice)
/hours X :number of hours (if laps not specified)
/wind X :0 no / 1 low / 2 high
/autox X :load autocross layout named X for this track
/axclear :clear autocross layout
Commands with a parameter - any time :
/axlist X :get list of layouts for track X - e.g. AU1
/maxguests X :max number of guests that can join host
/carsmax X :max number of cars in a race
/carshost X :max number of cars (real+ai) on host pc
/carsguest X :max number of cars (real+ai) per guest pc
/pps X :smoothness (3-6) number of car updates per second
/msg X :send system message
/rstmin X :no restart for X seconds after race start
/rstend X :no restart for X seconds after race finish
/autokick X :no/yes/ban/spectate (Wrong way drivers)
/midrace X :no/yes (Join during race)
/mustpit X :no/yes (Pit Stop Required)
/start X :fixed/finish/reverse/random (Default race start)
/pass X :set new password (BLANK = no password)
Kick and ban commands - any time :
/spectate X :make user X join the spectators
/kick X :disconnect user X
/ban X Y :ban user X for Y days (0 = 12 hours)
/unban X :remove ban on user X
Host settings commands :
/vote X :no or yes - guest voting
/select X :no or yes - guest selection
/cars [cars] :see below : "Car Strings"
These commands are also available to any user who has connected to the
host using the admin password if one was specified when the host was
To restrict the tracks allowed on a host :
Create a text file named "tracks.txt" in your LFS folder.
List all the tracks and configurations you want to allow.
Type one configuration on each line.
You must use the short name of the tracks :
[first two letters of name] [config number] [reversed]
Other text commands :
Most of these text commands replicate functions usually controlled by
pressing on-screen buttons but can be useful in other situations, for
example when controlling LFS from an external program using InSim.
Game setup screen only :
/ai [NAME] :add ai driver (can specify NAME)
/ready :set ready
/cancel :cancel ready
/clear :clear all racers from list
Game setup screen on in game :
/car XXX :select car (e.g. XRT)
/setup X :select setup X
/colour X :select colour X
/join :join the race
/spectate :spectate or leave grid
/leave :disconnect from host
/player X :select existing player X
Mode / replay control :
/spr X :run a SP replay from entry (front end) screen
/mpr X :run a MP replay from entry (front end) screen
/end :exit from replay back to front end
/sp :go into single player from entry screen
Any time :
/speedreduce X :total speed steer reduction (0 to 1)
/reducehalf X :speed in m/s for half of reduction
/loadkb X :load kb settings file (datamiscX.kbs)
/savekb X :save kb settings file
To get info from LFS World - /w and /ws commands :
/w CMD sends command to LFS World for current car/track
e.g. /w pb (Personal Best) or /w laps (Laps)
/ws TRACK CAR CMD sends command for specified car/track
e.g. /ws BL1R XRT pb (get PB in XR GT TURBO at Blackwood GP REV)
More online DB access commands can be found on the
"LFS Keys" page at www.liveforspeed.net
To get info from master server - /m command :
/m find USER : find a user online
/m ? : get a list of master commands
Car Strings :
The /cars command for the startup command line or for hosts / admins
now uses the three-letter S2 car codes.
/cars=XFG+XRG :Allow XF GTI and XR GT
/cars=MRT :Allow MRT5 only
These Car Groups can be used as well :
ALL - all cars
ROAD - road legal cars
RACE - race cars
TBO - same as XRT+RB4+FXO
LRF - same as LX6+RAC+FZ5
GTR - same as FXR+XRR+FZR
The plus and minus symbols can be used in conjuction with these :
/cars=TBO+LX4 :Allow XRT, RB4, FXO and LX4
/cars=ROAD-UF1 :Allow all road cars except the UF 1000
Replay Analyser File :
This feature is provided for use in external analyser applications.
It stores data from one lap of driving.
- USER information :
Press ESC while viewing the car in a replay, on the lap BEFORE the
lap you wish to analyse. Click on "Output lap data" and enter the
name of the output file. This file will be saved in a "raf" folder.
Use an external application to open the .raf files (not supplied).
The file will be created when the car crosses the start line and
will be closed when the car crosses it again 1 lap later.
- PROGRAMMER information can be found at www.liveforspeed.net
To create a language pack :
- First run LFS. This will create a file "English.txt" in a folder
"datalanguage". Please do not edit English.txt as it will be
overwritten each each time you start LFS. Instead, make a copy of
the file with the name of your language replacing "English".
- After creating your new file, it can be edited in a text editor.
- Load your language in Options...Player.
- Reload the language file any time with SHIFT+F5, for convenience.
- The help.txt file can also be edited, in the datamisc folder, copy
the file help.txt to a new file help_XXX.txt (where XXX.txt is the
name of your language file).
- Only the ISO character set is supported. Languages which require
characters not included in the ISO set are not yet fully supported.
Motion Simulator Support : (OutSim)
The user's car in multiplayer or the viewed car in single player or
single player replay can output information to a motion system while
viewed from an internal view.
This is controlled by four lines in the cfg.txt file :
OutSim Mode 0 :0-off 1-driving 2-driving+replay
OutSim Delay 1 :minimum delay between packets (100ths of a sec)
OutSim IP 0.0.0.0 :IP address to send the UDP packet
OutSim Port 0 :IP port
OutSim ID 0 :if not zero, adds an identifier to the packet
Each update sends the following UDP packet :
unsigned int :time in milliseconds (to check order)
Angular Velocity :3 floats
Orientation :3 floats Heading, Pitch, Roll
Acceleration :3 floats X, Y, Z
Velocity :3 floats X, Y, Z
Position :3 ints X, Y, Z (metres x 65536)
Game ID :1 int (optional ID - if specified in cfg.txt)
Note 1 : X and Y axes are on the ground, Z is up.
Note 2 : Motion simulators can be dangerous. The developers of the
Live for Speed racing simulator do not support any motion systems in
particular and cannot accept responsibility for any injuries or death
connected with the use of such machinery.
Thanks to all hosts and racers for your support.
(c) 2002-2005 Scawen Roberts - Eric Bailey - Victor van Vlaardingen