Description

This patch should address the issues that many players have been having with launching Expanding Fronts. In addition, several minor in-game issues have been fixed. To install, run EF_Patch_1.0.1.exe and point it towards your mod installation directory. Note that the full 1.0 version must be installed BEFORE the patch.

Preview
Expanding Fronts 1.0.1 Hotfix
Post comment Comments
DarkDiablos
DarkDiablos - - 238 comments

There any way to get widescreen working with EF?

Or even a successful method of windowed mode D:

Reply Good karma Bad karma+1 vote
Gen_Rhys_Dallows Author
Gen_Rhys_Dallows - - 660 comments

We're looking into it, but every method we've found causes some horrible stability issues.

Reply Good karma+5 votes
Dalo_Lorn
Dalo_Lorn - - 113 comments

(buried)

4 out of 55 detections on VirusTotal (by software I've never heard of before). I suspect this is the installer's fault, so I've extracted the executable using 7zip and am subjecting its contents to further analysis.

So far, the theory appears to be correct.

Reply Good karma Bad karma-7 votes
Dalo_Lorn
Dalo_Lorn - - 113 comments

(buried)

I didn't look into the data files, but from the looks of it, there are two possible causes:

1. The installer is not as benign as you guys would have us believe, but the files it puts in your GB folder are.

2. The detections are all paranoid false positives. :P

Reply Good karma Bad karma-7 votes
Kriegtooth
Kriegtooth - - 1,608 comments

Probably false positives. Especially if the results are generic ____. With McAfee, if I see anything named generic trojan or generic artemis, 99% chance its a false positive. I had items that came on my computer give me false positives.

I mean, they did make a manual installation set up too.

Reply Good karma Bad karma+3 votes
Metaltooth
Metaltooth - - 2,664 comments

Darktrooper phase 2 is glitched

Reply Good karma Bad karma+3 votes
LeadedMicrobe
LeadedMicrobe - - 7 comments

I apologize if Im wrong but shouldnt the Trade Federation and Confederacy transport mechs models be switched? The Platoon Attack Craft is what the TF used in episode 1 and its model is on the Confederacys transport mech. Obviously nothing big was just wondering

Reply Good karma Bad karma+1 vote
Jorritkarwehr
Jorritkarwehr - - 254 comments

Both are Trade Federation units that were also used by the Confederacy (the Platoon Attack Craft was also seen at the Battle of Kashyyyk in Episode III). It could go either way, but the MUT matches much better with the Trade Federation graphic set than it would with the Confederacy one.

Reply Good karma Bad karma+1 vote
LeadedMicrobe
LeadedMicrobe - - 7 comments

Ahh, yea I saw they were at the Battle of Kashyyyk so it makes sense, they are that brown color scheme for the TF and the Platoon Attack Craft could carry Supers anyways. :D

Reply Good karma Bad karma+1 vote
KursedVixen
KursedVixen - - 23 comments

am I the only one that sees the new rebel alliance upgrade not working?

Reply Good karma Bad karma+1 vote
Jorritkarwehr
Jorritkarwehr - - 254 comments

Which one?

Reply Good karma Bad karma+1 vote
KursedVixen
KursedVixen - - 23 comments

The one that makes their air units regen HP.

Reply Good karma Bad karma+1 vote
Jorritkarwehr
Jorritkarwehr - - 254 comments

Yeah, that's not functional yet. It's disabled in the Hotfix, but you can still get to it with All Techs active.

Reply Good karma Bad karma+1 vote
KursedVixen
KursedVixen - - 23 comments

awww i wanted to use a mass air force to blow up my enemies....

course I'd have to pull them back to regen.

Reply Good karma Bad karma+1 vote
treintaysiete
treintaysiete - - 1 comments

My game crashes at random intervals while using this mod. It only seems to occur when playing a custom scenario and at random times. Any ideas?

Reply Good karma Bad karma+1 vote
theinsanegamer2002
theinsanegamer2002 - - 5 comments

is ther any differnce of this than the exe and manual?

Reply Good karma Bad karma+1 vote
411Remnant
411Remnant - - 111 comments

Dont know if your aware but it doesnt seem to work with the steam version. They just released on steam last week and its understandable that this hasn't had a patch for that version. Anyone else get the same problems?

Reply Good karma Bad karma+1 vote
KursedVixen
KursedVixen - - 23 comments

Should be a way to mod the Steam version.... hmm.

Reply Good karma Bad karma+1 vote
Guest
Guest - - 689,348 comments

This comment is currently awaiting admin approval, join now to view.

APR18
APR18 - - 2 comments

Whenever I try to run the game it says that it could not initialize the graphics system. The original game ran just fine, but the mod will not run. If anyone knows how to fix this it would be much appreciated.

Reply Good karma Bad karma+1 vote
APR18
APR18 - - 2 comments

Nevermind I got it running, lol.

Reply Good karma Bad karma+1 vote
Guest
Guest - - 689,348 comments

This comment is currently awaiting admin approval, join now to view.

Guest
Guest - - 689,348 comments

When I try to play games it informs me of an AI script error and the AI player just walks around with a worker not making progress. Does anyone know how I can fix this?

Reply Good karma Bad karma0 votes
Clone_Birks
Clone_Birks - - 2 comments

I had the same problem, I had to uninstall and validate game files to fix the issues.

Reply Good karma Bad karma+1 vote
McRipfist
McRipfist - - 1 comments

I'm not sure how I construct the added mechanicals or deploy the new infantry units. Can someone explain to me how it's done? When I am playing a standard game I cannot see the option to build them.

Reply Good karma Bad karma+1 vote
Guest
Guest - - 689,348 comments

This comment is currently awaiting admin approval, join now to view.

Clone_Birks
Clone_Birks - - 2 comments

After manually installing the main DL and this patch, for some reason the AI seems to be dead, it will just send its villagers out to scout instead of building, although, this may be a result of me putting the game on tech level 4 and deathmatch to quickly get a look at the new faction on the fly

Reply Good karma Bad karma+1 vote
C.Ross
C.Ross - - 3 comments

Any particular reason why my malware protection is blocking this thing for being a virus Gen_Rhys_Dallows ?

Reply Good karma Bad karma+1 vote
Sithsorcerer
Sithsorcerer - - 63 comments

Its finally launching the correct one but it now says "could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw" what does this mean and how do I fix it?

Reply Good karma Bad karma+1 vote
hellsignmeup
hellsignmeup - - 1 comments

Ive come across a problem... the games addons crash the game when I try to pick them in the editor. i have the steam version

Reply Good karma Bad karma+1 vote
HunterLukeJensen
HunterLukeJensen - - 3 comments

Is there anyway this Here Expanding Fronts will have kylo ren casue that would be awesome

Reply Good karma Bad karma+1 vote
Bigby
Bigby - - 28 comments

Good stuff

Reply Good karma Bad karma+1 vote
Von_Blitz755
Von_Blitz755 - - 12 comments

Can anyone help me with downloading this mod for the steam version.. The auto installer does not have to right path and i do not know exactly where to place the manual install for the steam version of the game, any help would be extremely appreciated!!!

Reply Good karma Bad karma+1 vote
wolfnz
wolfnz - - 1 comments

Multiplayer? (How to?)

Reply Good karma Bad karma+1 vote
Guest
Guest - - 689,348 comments

This comment is currently awaiting admin approval, join now to view.

Guest
Guest - - 689,348 comments

This comment is currently awaiting admin approval, join now to view.

Guest
Guest - - 689,348 comments

This comment is currently awaiting admin approval, join now to view.

Post a comment

Your comment will be anonymous unless you join the community. Or sign in with your social account: