S.T.A.L.K.E.R : Call of Pripyat GUNSLINGER Ultra HD Pack V1.0
GUNSLINGER Ultra HD Pack V1.0
-----------------------------
S.T.A.L.K.E.R : Call of Pripyat GUNSLINGER Ultra HD Pack V1.0 Trailer
This modpack merged Gunslinger with the best graphics mods along with other mods to make the game more realistic and close to modern games.
-----------------------------
Installation:
*Make sure you have a clean copy of S.T.A.L.K.E.R Call Of Pripyat
1-unpack the mod wherever you want on your PC
2-Open fsgame.ltx inside the mod folder and edit the line below :
$game_root$ = false| false| * your S.T.A.L.K.E.R Call Of Pripyat game folder location *
example:
$game_root$ = false| false| D:\Steam\steamapps\common\Stalker Call of Pripyat
3- Play !
** this mod is super heavy !!! so if the game crush lower the graphics settings until you get the appropriate settings **
-----------------------------
Credit
Gunslinger (Gunslinger team)
AtmosFear & Absolute Nature (CrommCruac)
Stalker Two-K (paranoiia8)
Call of Chernobyl HD Models Addon (Ninja_Nub[NOR])
New particles (Valer4ik)
Phobos: Artefacts Reloaded Mod (FantomICW)
Enhanced Sun Effects (Brainscorcher
Gore mod (100)
Two-K (GOOHSTeam)
Remake v.3 (Dante)
modpack by ( Gendarme_Zero )
![GUNSLINGER Ultra HD Pack V1.0 [Outdated ]](https://media.moddb.com/images/downloads/1/188/187740/COVER.png)
Hey so I'm wondering, is this is basically the remake mod combined with gunslinger? Also using gunslinger's engine version? Which I'm not sure which it is, not openxray right?
Does this run any better than the remake mod because with it I'm getting unbearably low frames even though my pc can handle all of the mods on the original xray or the openxray engine by itself with vanilla. So not sure why that's the case. Tried both the old renders and opengl.
Guess I'll get this and try it out myself.
Crashes at loading screen. Welp. Tried out different settings, double checked stuff.
Your system specs?
Don't take the texture detail slider above 50%
Working well now with atmosfear stuff turned off in the ini, enhanced dyn. render, textures at 25% (all else maxed) and -noprefetch. Also had to start a new game. Running an i7 3770, 2gig gtx 960 and an ssd. I wonder can this mod work on open xray to take advantage of 64 bit architecture and multiple cores?
Where did you find the ini file ? Can you share it ? Please
gamedata/configs/atmosfear_parameters.ltx
YO! Please could You tell wich line in "atmosfear_parameters" file is for turning off a psi storm, blowouts? And what exact You must write, "false" or "0" ? Thanks
opt_enable_fallout
opt_enable_psi_storm
put a 0 instead of a 1 at the end of 'em.
blowouts can stay enabled I think. If you crash when they happen you can set the opt_enable_blowout to 0 too. Also you gotta start a new game for any of this to work. Also try dx10 enhanced render or one just above it enhanced render (not dx10) and texture slider at 25-50 percent.
Ok thanks
Goxy, did you get the mod running together with Openxray? I don't understand how to merge the two mods since gunslinger requires its own bin folder and fsgame.ltx :/ Help!
After I played successful for like 2 hours, I get a freeze everytime I load a Savegame. This is the Last Part of the Log:
FATAL ERROR
[error]Expression : !m_error_code
[error]Function : raii_guard::~raii_guard
[error]File : D:\prog_repository\sources\trunk\xrServerEntities\script_storage.cpp
[error]Line : 748
[error]Description : e:\gunslinger hd\gamedata\scripts\xr_logic.script:597: attempt to call field '?' (a nil value)
stack trace:
make sure you follow the Installation steps,use DX10 and lower the texture bar below 50%
how combine mod together with Openxray?
Make sure to run the updater and use only DX10. Since this is merged with Remake Mod I HIGHLY suggest turning down the "texture" slider to about 20% and see how your PC handles it. Then slowly increase it.
Crash at start, when I try to starting the game it just crash.
Same for me, cant even start the game...
delete the userdata folder in mod folder and try start the game with that static light and 50% or less texture quality.
no change, still it keeps crashing.
FATAL ERROR
[error]Expression : fatal error
[error]Function : CInifile::Load
[error]File : D:\prog_repository\sources\trunk\xrCore\Xr_ini.cpp
[error]Line : 382
[error]Description : <no expression>
[error]Arguments : Duplicate section 'booster' found.
Make sure your STALKER COP copy is clean from any modification and that you set game path inside the fsgame.ltx file
this mod work fine with stalker cop steam version,not sure about other versions of the game.
ok, so i installed a fresh Steam copy of an CoP on to my other drive, replaced the files with the mod, edited the fsgame.ltx and still the same thing happened...
This comment is currently awaiting admin approval, join now to view.
don't install the mod on your STALKER game folder,unpack the mod wherever you want on your PC,open fsgame.ltx inside the mod folder and edit the line below :
$game_root$ = false| false| * your S.T.A.L.K.E.R Call Of Pripyat game folder location *
example:
$game_root$ = false| false| D:\Steam\steamapps\common\Stalker Call of Pripyat
1-Run CheckUpdates.exe ,after the update finish installing last update you can safely play the mod
(make sure your PC can handle this HEAVY Graphics pack,start with static light settings and low textures settings)
lol, ok, that was mistake on my part :D Im used to mods that overwrite the contents of the game. It works now, so thanks for the help :)
Do you know why everytime stalker die GUHD SCOP just crashes?
Everytime I die the game just crashes. Please help.
same, always
Can you please tell me how to remove the reshade? I dont like it and I would like more performance.
that in game environment
try use static light
yeah static works it seems
A lot of people seem to have trouble getting this going, but it's usually one or two simple problems. The instructions below might look long and complicated, but it isn't, I promise.
1. Your fsgame.ltx needs to be edited to point the $game_root$ to the correct spot instead where it pointing initially upon installation of the mod. Assuming you have STALKER from Steam, it will be wherever your steam folder is, then steamapps, then common, then Stalker Call of Pripyat. So, for me, it would look like:
"$game_root$ = false| false| C:\Program Files (x86)\Steam\steamapps\common\Stalker Call of Pripyat\"
2. Before running the "Play GUNSLINGER Mod" app, run the "CheckUpdates" app. It may or may not ask you to select where the game root is, which will again be the same spot as before, again, for me that was: "C:\Program Files (x86)\Steam\steamapps\common\Stalker Call of Pripyat\"
3. These hi-res mods demand quite a lot of RAM and the X-Ray engine Stalker uses is quite dated in that (and a bunch of other ways too lmao) respect. It won't like using more than 3.8GB of RAM regardless of if you have way more than that and is generally the number one cause of crashing upon finishing the loading screen after starting a new game or loading one in progress. This also means loading will take forever if you don't do this thing I am about to tell you to do that will often fix this. You will need to make this run without preloading every single now massive resource in a particular map. You've installed a mod that is over 12 GB once unpacked and the entirety of Vanilla CoP is like 5 GB. Anyway, what you will need to do is this:
Right click on the "Play GUNSLINGER Mod" App, tell it to create shortcut. Right click this new shortcut, go to "Properties" and at the end of the text in the target box, add after the quotation mark this: " -noprefetch". That first quotation mark is the end of what is initially in the target box. It needs to have that space between the " and - for this to work. So, for me, the target box reads thus exactly, opening with the quotation mark but not ending with one: "E:\GUNSLINGER Ultra HD Pack V1.0\GUNSLINGER Ultra HD Pack V1.0\Play GUNSLINGER Mod.exe" -noprefetch
You HAVE TO launch the game from the shortcut to the .exe you just made, not from the original .exe
I will add that doing this will also necessarily add occasional stuttering in game as it will need to load resources as needed at times instead of all at once. If you've been playing since SoC you will appreciate that this is part of the essential Stalker experience anyway and can use that extra time to good effect. For instance calling and checking on old relatives and friends, preparing a high proof alcoholic drink (Vodka is the obvious choice for Stalker, but don't be afraid of other stuff either, like scotch, gasoline, or locally made tequila), preparing tax returns, or changing the oil in your vehicle. You need to recognize that this is a function and a feature, and not a glaring problem of a video game engine that came out of eastern Europe literally a decade ago. It also can only ever use 1 processor lmao so use that extra power your modern multi-core CPU has to mine cryptocurrency or watch adult material at the same time or something idk
4. Trust that the game will still look very good at DX 10 and possibly below. I am running on a NVIDIA GTX 750 Ti 4GB (I know), Windows 7 64 bit (Yes, I know...), an Intel Q9550 Quadcore 2.8GHz with 8 GB of DDR3 RAM (Stop it, I know!) on a motherboard the BIOS of which won't even allow me to overclock the CPU (The price was right, ok?), and had to bring it to "Enhanced Full Dynamic Lighting", right below "Enhanced Full Dynamic Lighting (DX 10)" for it stabilize, and it is just fine.
5. The replacement textures are massive and as the pack's author suggests, you should lower the texture quality bar to below 50% or possibly even lower just to help make sure you won't suffer a crash from the game demanding more RAM than the x-ray engine is willing to ask for. You will hardly discern any difference except in frame rate. I threw mine down to the second lowest texture setting. You may need to experiment with some of the advanced video settings as well. Turning the sun rays completely off provided a huge FPS boost for me.
6. PSI-Storms and fall-out storms may cause crashing. For some reason the Atmosfear options menu will not work in game for me whether starting a new game or not, so you may need to disable those in the Atmosfear parameters manually in the .ltx file located in the mod's gamedata/configs.
Finally, if you are having problems with crashing on start up after changing video settings in the inapp options menu only, go into the mod's userdata folder and delete user.ltx. This will reset video settings.
Happy hunting, stalker.
Thanks for the clarification Stalker
yes its only few easy steps to make sure everything run fine,as long anyone follow them it will work perfect.
Some should understand this is HEAVY Graphics pack and of course it going cause a lot of crushes if your PC cant handle it
Thanks again stalker and i hope anyone with problems can find a solution in your guide.
I think a major point of confusion is that this type of combo mod can cause crashing even when the PC CAN handle it. It's the out dated engine that causes problems.
A lot of folks don't understand why the newest Battlefield game, for example, runs fine, but this crashes.
Thanks for sharing the mod pack.
Thanks a lot. Just to clarify - Gotta start a new game to apply the atmosfear settings? Cuz i turned off fallout, emmisions and psi storms and was still crashing on old saves.
YO! Please could You tell wich line in "atmosfear_parameters" file is for turning off a psi storm, blowouts? And what exact You must write, "false" or "0" ? Thanks
I followed every step. I tuned down the graphics, texture slider minimum, disable the atmosfear features, added the "-noprefetch" to shortcut, still crashes to desktop when finishes loading...
i literally everything step by step exactly with high spec pc that handles battlefield 5 with ease and i still get:
FATAL ERROR
[error]Expression : !m_error_code
[error]Function : raii_guard::~raii_guard
[error]File : D:\prog_repository\sources\trunk\xrServerEntities\script_storage.cpp
[error]Line : 748
[error]Description : ...ra hd pack v1.0\gamedata\scripts\bind_stalker.script:67: attempt to index global 'gwr_thirst' (a nil value)
stack trace:
This comment is currently awaiting admin approval, join now to view.
Tf is with strider his model is all blue
How do i turn on the default Depth of field with Gunslinger? DOF when you reload guns.
hi. my problem is my game's localization is russian, how can I change it to ENG? ty
This comment is currently awaiting admin approval, join now to view.
will you be updating this to work with the new build 07022020 or is it still compatible? has anyone tried it yet?
You can just install the new version of gunslinger and add gamedata from this on top of it.
Is it normal for it to take close to 5 minutes to load? (Using an SSD, 6700k and 2070 S)
Did you manage to fix this? I have tried with no -noprefetch and with -noprefetch and the fastest load time is 3:45 seconds.
Hey guys, I solve my problem with many game crashes by installing adaptation of atmosfear on top of modpack. I'm not sure I can put link to this adaptation, so I believe u can easily google it.
I followed the installation steps to a tee, yet whenever i attempt to start a new game with the launcher, it freezes, following a crash. Im not sure why this happens, i"m starting it on low settings with a good pc. What should i do?
This comment is currently awaiting admin approval, join now to view.
So I managed to get this going nicely after few days.For me it's running better on Dx11 for some reason,1440p on mostly high settings but this mod is heavy indeed so even with powerful pc limit yor expectations and start with rather low settings. Nevertheless once it's working this mod looks fantastic and gameplay is lots of fun. It works very well together just needs a little bit tweaking an patients to get it going. Thanks for sharing and all the hard work! it's very much appreciated. _-TruGamer.