Description

Montcuit, France, 1944, June. You infiltrate, capture and defend crosstowns in the village of Montcuit.

Preview
Battle of Montcuit (ver 2.35)
Comments
Dwarden
Dwarden

good one ;)

Reply Good karma Bad karma+3 votes
SuperRipped
SuperRipped

Played this on normal with a buddy. Had a great time. My only complaint is that the next wave doesn't come until every single enemy is dead, thought if they did, We'd have gotten annihilated.

Reply Good karma Bad karma+1 vote
djsatane Author
djsatane

Yes, I am thinking of possibly altering that in such a way that once few minutes after last enemy entered the zone of the counterattack wave I will check if any enemies are still alive in a smaller zone around town and not entire map and trigger timer, or possibly add a button where player can decide they no longer feel need to setup/wait.

Reply Good karma+2 votes
djsatane Author
djsatane

I will release today new version with few map fixes (undestructable wall near where mortar is at start) and I will also add a better way to trigger next phases of the mission this including tagging every soldiers that ai has, except for plane pilots in case a plane is frozen somwhere in the zone.

Reply Good karma+2 votes
godzillafirefox
godzillafirefox

Nice! Very well done!

Reply Good karma Bad karma+3 votes
djsatane Author
djsatane

Battle of Montcuit Version 2.35 has been released. In this version various triggers/checks are improved. You also now receive elite airborne air drops if you lose too many soldiers. Just remember you can only receive them every 5 minutes at the most. Small map fixes, extra convoy activity tweaked.

This release also includes gsm66-addon-battle-montcuitmod. If you use German Soldiers Mod 6.6 then you should use this mod loaded last as well. That is an addon mod for this mission to work properly with GSM 6.6. IMPORTANT: Activate gsm66-addon-battle-montcuit mod *AFTER and only AFTER* GSM 6.6 & Battle of Montcuit is already active* If you do not use GSM 6.6 at all you can safely delete gsm66-addon-battle-montcuitmod and only keep battle of montcuit.

Reply Good karma+2 votes
msepar00
msepar00

i activate everything as you say but then i cant find your mission. there is only that list of 5 factions and nothing else.

Reply Good karma Bad karma+1 vote
djsatane Author
djsatane

If you activate Battle of Montcuit mod then it should show up in skirmish menu under "skirmishes by djsatane". You have your game patched to latest patch 2.00.11? This is how it shows for me and many people I know, here is a picture: Cuih.dyndns.org . You only see 5 factions and dont see even bonus missions? Bonus like xmas and barbeque come with the game I believe nowdays. I assume you dont have the game either patched or on steam right? That menu do the 5 factions fill your screen from top to bottom? Maybe you play at small resolution and those other buttons are hidden below?

I can make you a custom progress file that will force it to be shown, but this mod contains localization that makes sure the mission show up in single player menu...

When you load the mod, if you go to the multiplayer lan/internet lobby and click to start a game, when you choose maps do you see battle of montcuit on the bottom in skirmish section?

Reply Good karma+1 vote
OldSpot
OldSpot

Dammn good mod mate.
cheers OldSpot

Reply Good karma Bad karma+1 vote
msepar00
msepar00

yes i have the latest patch. i think that my problem is resolution because i find your mission under skirmish in multiplayer but in single player menu i cant see nothing under japanese faction. im playing on my laptop 15,6" and on 1366x768 resolution and i didnt have problem like this before.

Reply Good karma Bad karma+1 vote
djsatane Author
djsatane

Go check under \men of war assault squad\mods\battle of montcuit\localization\mission\single\dj-skirmish make sure 2 localization files are there(.lng).

Next, we could try something, it is possible that if you did not complete all skirmishes the progress file blocks seeing missions afterwards... not sure if that would happen but we can check.

Save this file: Cuih.dyndns.org it will save a txt file to your drive named game_progress.set

Next if you are on windows 7 go to: C:\Users\*YOURUSERNAME*\Documents\My Games\men of war - assault squad\profiles\*PROFILENAME YOUUSE*\ If you cant find it just go to my documents in desktop and try finding same location under My Games. In your profile folder for mowas you will see game_progress.set file there, rename it to .bak so you can back it up and place the one I told you to download. Run the game and see if you can see anything under Japan. If resolution is indeed your problem that would seem odd, but if you can try that file. If you still have a problem I can do special package for you so that the mission would show up under USA but that would be drastic move only if the above doesnt work out. gl.

Reply Good karma+1 vote
msepar00
msepar00

i follow your instructions but nothing has changed. i took a few screenshots of my sp menu when i activate gsm mod, your map, and addon and original sp menu. can i send you my shots somehow?
i think the gsm mod change it. because when i activate it, whole menu goes down a bit.
if u cant find simple solution dont bother too much i will play your mission without gsm mod!

Reply Good karma Bad karma+1 vote
djsatane Author
djsatane

Oh, I wasnt aware that you see the missions when gsm is off but when you activate gsm 6.6 then battle of montcuit and then gsm66-addon-battle-montcuit you dont see the mission. You indicate GSM 6.6 somehow moves over the menu, thats possible. Good thing is that you can see it without GSM 6.6. You can email me your screenshots to djsatane@gmail.com

I have made modification of my gsm 6.6 addon for battle of montcuit for those that have problem not seeing the mission in single player menu with gsm 6.6 active. msepar00 go ahead and download this: Gamefront.com

You have to use this instead of the gsm addon that came with the mission. In other words, activate GSM 6.6 first, next activate battle of montcuit and then finally activate gsm66-addon-montcuit-menu-fix. With this you will see "battle of montcuit gsm 6.6" under USA faction. Just remember to only use that addon for when you play single player my mission with gsm 6.6. cheers.

Reply Good karma+1 vote
msepar00
msepar00

thank you a lot men! i send you those screenshots
btw nice map, keep up the good work

Reply Good karma Bad karma+1 vote
djsatane Author
djsatane

Yes, it seems GSM was altering menu for you and causing all the buttons move down thus blocking anything below 5 factions. With new GSM 6.7 you wont need to use the addon I believe but you can still use that menu fix addon even with 6.7 so that you can see mission under USA.

Btw for future skirmish that I been working on I already made sure that it will show up under original factions instead of extra buttons, that way it will ensure no problems like this occur.

Reply Good karma+1 vote
djsatane Author
djsatane

Just heads up for those that play missions with GSM. GSM 6.7 came out - Germansoldiers.net . I am not sure yet but I believe you do not need to use my addon that comes with my mission the addon for gsm was for 6.6. I believe 6.7 have the fixes such as repair working properly in single player.

Reply Good karma+1 vote
msepar00
msepar00

it doesnt work properly on every skirmish mission. some of the just crash when loading.
and i still have the same problem with sp menu like with gsm 6.6

Reply Good karma Bad karma+1 vote
djsatane Author
djsatane

I think gsm 6.7 has some bugs, I know there is a bug with english centurion so any mission or map that uses it will crash. As for menus, it must also be related to ur resolution and gsm because at 1680x everything is fine, but you can still use that menufix mod I made and posted earlier for u, that way it will show up under usa.

Reply Good karma+1 vote
t.ambrosi.mirco
t.ambrosi.mirco

how to install that I do not understand

Reply Good karma Bad karma+1 vote
Gopanchik
Gopanchik

you have to unzip it in mods folder in your game. if it is STEAM version => "D:\Program Files (x86)\Steam\steamapps\common\Men of War Assault Squad\mods"

Reply Good karma Bad karma+1 vote
Gopanchik
Gopanchik

Thanks for this mod. i want to give you an idea.
A player start mission by only 1 man without any weapon (far an example in prison). Next he has to kill guard and take his pistol... during the game he has to call some reinforcements and to release allies up to full team (10 men). And then to do some questions.

Reply Good karma Bad karma+1 vote
djsatane Author
djsatane

Yes I have this on my agenda to do, except it will be few prisoners and they will be masked after you break out it will make u dress as a german and unless you kill someone in view of another or officer sees you you can keep sabotaging enemy, once you are discovered another part of the mission starts... but this is all in planning so far.

Reply Good karma+1 vote
purplebuttsss
purplebuttsss

When I load in the first mission it pops something up than it closes the game! D: Help me please! And I am not a troll!http://gyazo.com/cf03e67c9f37550a91ac9b6d95fc36f5 Here is a screen shot of it

Reply Good karma Bad karma+1 vote
Post a comment
Sign in or join with:

Only registered members can share their thoughts. So come on! Join the community today (totally free - or sign in with your social account on the right) and join in the conversation.