Overgrowth takes place in the savage world of Lugaru where rabbits, wolves and other animals are forced to use paws, claws and medieval weaponry to engage each other in battle. Combining 3rd person adventure platforming with intricate melee combat, Overgrowth achieves a unique feel. Overgrowth also benefits from Wolfire's brand new Phoenix Engine which has been built from the ground up to allow the use of cutting edge graphics, animation, and physics. Add to these exciting features Overgrowth’s realistic artificial intelligence and streamlined control system and the result is an astoundingly immersive experience.

We can achieve a lot of performance gains by using texture atlases and instancing, but it won't be enough for dense environments like forests and jungles. For these, we need imposters!

Posted by jeffr on Oct 4th, 2010

We can achieve a lot of performance gains by using texture atlases and instancing, but it won't be enough for dense environments like forests and jungles. For these, we need imposters!

What are imposters?

Imposters are an extreme form of LOD (level of detail) optimization, replacing entire models with simple, flat pictures of themselves. They are much like the flat facades used in old Hollywood films, or the cardboard character cutouts used to promote books and movies. Here is an Overgrowth scene that has 3D trees interspersed with imposter trees: first you can see flat checkerboard imposters, then cutout checkerboard imposters, and finally the actual colored and shaded imposters.

So now it should be clear what imposters are, in general, which brings us to the next question:

Why use imposters?

We use imposters because they are much, much faster. A high-detail tree could require a thousand triangles, and an imposter is just two (because there are two triangles in a square). Similarly, a tree might draw each pixel multiple times because of its layers of leaves, but an imposter only draws each pixel once. Here's a framerate comparison between a scene with trees, and the same scene with some of the trees replaced:

It looks almost exactly the same, but it draws more than twice as fast!

How do imposters work?

To draw imposters, we need two main components: a surface to draw the imposter image on, and we need the imposter images themselves. Let's start with the surface:

In Overgrowth, the imposter surface geometry is sent to the graphics card as simple triangles around the origin, along with extra information about their transformation matrices and the position of the camera. The vertex shader then transforms the imposter and rotates it to face the camera, using techniques like those discussed in my linear algebra posts. Here is a picture showing how they rotate to face the camera:

This has to be done in the vertex shader because the camera position can change every frame, and it would be quite costly to update the imposter orientation on the CPU every frame, and to send the new coordinates to the GPU. If we do it on the vertex shader, then the imposter vertices can live on the GPU in vertex buffer objects, which are very fast.

Now that we have our imposter surfaces to draw on, we need the imposter images themselves. To match the shading of the 3D object, we will need to draw them in the same way that the object is drawn, combining a color map, normal map, and shadow map. To match the orientation of the 3D object, we will also need several different angles of the object. For now, I chose to use eight different angles, inspired by the old 2.5d shooters like Marathon and Doom. Here is a picture of the eight different angles and three different textures:

Imposter angles
From top to bottom: color map, normal map, and shadow map

To create them, I draw the eight different angles using shaders to make sure the results in are in the right format (converting tangent-space normals to object-space for example). The results are stored in textures using framebuffer objects, so the pixel information never has to leave the graphics card. These images are all drawn at double resolution and then scaled down, which is a quality-improvement technique known as supersampling.

While all instances of a given tree can share the same color and normal map, each instance has a unique shadow map. For this reason, shadow maps are drawn much smaller, and combined into a texture atlas (which I discussed in an earlier post). Here is an example of an atlas with shadows for all the angles of 32 different imposters:

Shadow sheet

Now, to draw the imposters, we can just bind the images, and draw the imposters using the same equations used to draw the 3D trees. There is just one more step: we have to be able to transition smoothly between different angles, and between the imposters and the 3D models. For now I am doing this transition using stippling (swapping out individual pixels). This is the same technique that is used in most AAA games for LOD transitions, including Crysis and Killzone 2.

This doesn't look perfect, but it's very fast, and it accomplishes my main goal: spread the transition out over time so there isn't a sudden eye-catching jump. It would take a lot of original research (months, probably) to make the transitions look good while looking at them, but this will at least help keep them from attracting attention! Here is a close up of an imposter fading from one angle to another:

Angle transition

And here is how it looks when the imposter transitions to the 3D model:

Imposter transition

Here is how these transitions look in action:

Be sure to check it out in HD!

Further work

There is still a lot more work to do to make the imposters look better and run more efficiently, but I am going to save it for later; I don't think the imposters are the bottleneck right now in terms of performance or appearance. However, here are some of my ideas for improvement:

  • Cut out unused space in the texture and use rectangular imposters instead of squares
  • Double-check color matching -- make sure there are no gamma issues
  • Add some vertical angles for view from above or below

These took nearly two weeks to implement, which is longer than I expected. However, I think it will be worth it to have more varied environments; without them we would only be able to have sparsely populated scenes like sand dunes or snowy plains. I will need to make other improvements to the editor to make it practical to actually create and manipulate dense scenes, but this is a good step!

Do you have any thoughts about the impostors, or questions about how they work?

Track us
on ModDB (visit our page)

Please join us here too:
Facebook icon ModDB icon Steam icon Twitter icon YouTube icon

Post comment Comments
Spare Oct 4 2010 says:

WOAH Just like in real life.

+5 votes     reply to comment
feillyne Staff Subscriber
feillyne Oct 4 2010 says:

Are you going to do grass blades, too?

+5 votes   reply to comment
formerlyknownasMrCP Oct 4 2010 says:

I'm glad to see you guys educating people further on how LOD works, I find all too often people seem to think that when games use this technology its doing something super advanced that no other developers can do.. which is a fallacy, they know how to do it and many developers do it well. The example above is how to use LOD well.

By turning your 3D models into 2D pre-Renders you save on so much performance allowing you to get greater details over larger distances with minimal costs. Any game can do this not just open worlds.

+2 votes     reply to comment
guesswho311 Oct 4 2010 says:

It truly is a great way to densely populate areas, although I do it slightly different. In one of my forests in my game I have the front trees always completely drawn out, so that it look nice, and then when you get really close to the forest the other begin to get a higher Lod. This works quite well for me. As always, the engine is looking sweet, keep up the good work!

+2 votes     reply to comment
acwel Oct 5 2010 says:

are u guys gonna do beta?....and if you do is it gonna be open or closed?

-1 votes     reply to comment
chris_sloany Oct 5 2010 says:

wow, amazing work again! and the music was very relaxing.

+2 votes     reply to comment
bikkebakke Oct 5 2010 says:

looks far better than fallout 3.s LOD optimization.

+2 votes     reply to comment
DuckSauce Oct 5 2010 says:

Amazing stuff guys :D

+2 votes     reply to comment
chineseroom Oct 5 2010 says:

Great work! I'm looking forward to you creating some nice grass and detail objects for the ground.

+2 votes     reply to comment
KEEP_IT_UP! Oct 5 2010 says:

great information and great work! thanks :)

+2 votes     reply to comment
AlekZanDer Oct 5 2010 says:

Good thing it's hard to notice.

+2 votes     reply to comment
kazumo Oct 5 2010 says:

Nice! Good job guys!

+2 votes     reply to comment
booman Oct 5 2010 says:

Very cool. I couldn't even tell the Imposters were following the camera at all. They still look very real, unlike Morrowind that used 3D trunks and 3D foliage on all the trees. Its interesting and the trees move, but still not even close to real life.

+2 votes     reply to comment
MirzaGhalib Oct 6 2010 replied:

I agree. This is a lot better than Morrowind's use. I was actually expecting it to be like that and was sad to see them go in that direction, but this is very well done.

+1 vote     reply to comment
jjawinte Oct 6 2010 says:

Spreading the wealth as always. A very informative article pointing out that it's perfectly fine to use a simple resource sparing technique that just plain works without sacrificing quality. Especially if the player is none the wiser for it.

+2 votes     reply to comment
vessedeloup Oct 12 2010 says:

Nice work! I'm happy to see that your going for more varied environments. Big empty spaces can really be awe-inspiring and impressive, but variety and depth is what makes a world come alive in my opinion.
It'll also give you a lot more gameplay and design options.

You should work on the stippling transitions though, the trees seem to become transparent every time the models change.

+1 vote     reply to comment
Post a Comment
click to sign in

You are not logged in, your comment will be anonymous unless you join the community today (totally free - or sign in with your social account on the right) which we encourage all contributors to do.

2000 characters limit; HTML formatting and smileys are not supported - text only

Windows, Mac, Linux
Developer & Publisher
Wolfire Games
Send Message
Official Page
Release Date
Game Watch
Track this game
Post news
Report Abuse
Report article
Related Games
Overgrowth Single & Multiplayer Adventure
Related Engines
Phoenix Engine
Phoenix Engine Commercial TBD
Related Groups
Wolfire Games
Wolfire Games Developer & Publisher with 4 members